hey man that sounds awesome!
how do we download the source code to you projects as this would be helpfull in people who are learning to program.
Hello,If you want the source of my floppy drive camera panner, you can find it here: http://www.codeproject.com/useritems/floppystepper.aspI think you'll have to be a member of CodeProject to download it.
Really interesting project!I'm in case modding scene and I'm planning to use your hints for a future project, but only one question : is't possible to use your sw with a USB to LPT dongle?And, excuse me, one more : it's possible to hook up and control two of this stepper with two dongle? I was planning to make a really little cutting plotter or something like that and your help will be appreciated!tnx a lot!
Hi Rigor, I think it is possible to use this software with an USB to LPT dongle. I've never tried it though. Check out this page: http://www.keil.com/support/docs/2866.htm. Answering your second question..there is no need to buy two dongles for controlling two stepper motors. Two stepper motors can be controlled though a single LPT port. Although I've never tried doing this, think it shouldn't be difficult. Hope that helps,Ashish
Tnx a lot for your answer!In in future we need some help about programming some movements for our cutting plotter project may we contact you?Regards!
Hey cant i drive a normal stepper motor which is having more wires (White-Ground, yellow, red, green and blue).to move the first step pulse yellow, then red like wise....
Hello ashish, I saw your project Camera Panning Using Parallel Port Controlled Floppy Drive which good.I inspire by that project.I control stepper motor which operating volt is 12, through PC programming in turbo C.Now i want to control small stepper motor through this programming.Now i take small stepper motor from floppy drive. I remove this stepper motor from floppy drive & try to rotate that motor but it is not rotate.I considered oprating volt of this small motor is 5 volt.So please me the guidence for that. Thanks.my mail id: email@example.com
Post a Comment